Rohde & Schwarz CMW500 - Remote Operation in a LAN

Getting Started
R&S
®
CMW500
45User Manual 1173.9463.02 ─ 06
Fig. 2-7: R&S Version Selector
To perform an uninstall, activate or repair action, follow these steps:
1. Select the relevant software branch or software package to the left.
If you want to perform an automatic restart of the instrument when the action is com-
plete, enable "with Restart".
2. Click the relevant action button to the right and follow any instructions of the "R&S
Version Selector" until the action is finished.
2.5.3 Remote Operation in a LAN
A LAN connection is used to integrate the R&S CMW500 into a home/company network
or to connect it directly to another PC or instrument. This offers several applications, for
example:
●
Transfer data between a controller and the tester, e.g. in order to run a remote control
program.
●
Transfer data from a remote computer and back, in particular waveform files (ARB
files).
● Access or control the R&S CMW500 from a remote computer using the "Remote
Desktop" application (or a similar tool).
●
Use external network devices (e.g. printers).
Administrative Tasks