Rohde & Schwarz CMW500 - Current State View; Info Dialog

Basic Instrument Functions
R&S
®
CMW500
106User Manual 1173.9463.02 ─ 06
Fig. 4-17: Print dialog
The R&S CMW500 supports the following bitmap data formats for print files:
●
.bmp, .emf, .jpeg, .pbm, .pgm, .png, .ppm, .wmf, .xbm, .xpm
The default file format (for file names entered without extension) is .jpeg.
4.6 Info Dialog
The "Info" dialog is subdivided into the following sections, accessible via softkeys:
●
Current state – displays information about the current state of installed firmware
applications
●
Messaging – for future extensions
●
Problem Reporting – allows to prepare collected logging information for problem
reporting to Rohde & Schwarz
To open the dialog press the INFO key at the (soft-)front panel.
4.6.1 Current State View
The "Current State" view provides information concerning the current state of all installed
firmware applications. Additionally it displays the software version at the top. At the bot-
tom it displays the most important address settings for remote control and information
related to calibration and RF path correction.
Info Dialog