Rohde & Schwarz CMW500 - Status: Q Uestionable: N Transition; Status: Q Uestionable: P Transition; Status:questionable:bit<N>[:Event]

Command Reference - Base Software
R&S
®
CMW500
277User Manual 1173.9463.02 ─ 06
STATus:QUEStionable:NTRansition <FilterBits>
Sets the negative transition filter. If a bit is set, a 1 to 0 transition in the corresponding bit
of the associated condition register causes a 1 to be written in the associated bit of the
corresponding event register. See also Structure of an SCPI Status Register.
Parameters:
<FilterBits> Range: 0 to 65535 (decimal representation)
Example:
STAT:QUES:NTR 1536
Set bits no. 9 and 10 of the QUEStionable:NTRansition register
(1536 = 512 + 1024 = 2
9
+ 2
10
).
Firmware/Software: V1.0.0.4
STATus:
QUEStionable:PTRansition <FilterBits>
Sets the positive transition filter. If a bit is set, at 0 to 1 transition in the corresponding bit
of the associated condition register causes a 1 to be written in the associated bit of the
corresponding event register. See also Structure of an SCPI Status Register.
Parameters:
<FilterBits> Range: 0 to 65535 (decimal representation)
Example:
STAT:QUES:PTR 1536
Set bits no. 9 and 10 of the QUEStionable:PTRansition register
(1536 = 512 + 1024 = 2
9
+ 2
10
).
Firmware/Software: V1.0.0.4
STATus:QUEStionable:BIT<n>:CONDition?
STATus:QUEStionable:BIT<n>[:EVENt]?
Returns bit no. <n> of the CONDition or EVENt part of the STATus:QUEStionable reg-
ister, see Structure of an SCPI Status Register. To return the entire parts see STATus:
QUEStionable:CONDition? and STATus:QUEStionable[:EVENt]?.
Suffix:
<n>
.
8 to 12
Number of the bit
Return values:
<BitValue> 0 | 1
Example:
STAT:QUES:BIT9:COND?
Query bit no. 9 of the CONDition part of the STATus:QUEStiona-
ble register.
Usage: Query only
Firmware/Software: V1.0.4.11
Instrument-Control Commands