Basic Instrument Functions
R&S
®
CMW500
91User Manual 1173.9463.02 ─ 06
Related Commands
Most contents of the "SW/HW Equipment" section can also be queried via remote com-
mands.
Remote command:
SYSTem:BASE:OPTion:LIST?
SYSTem:BASE:OPTion:VERSion?
4.4.5 Selftests
The R&S CMW500 provides extensive selftest procedures on module and system level.
The selftests are primarily intended for production and service purposes; they are not
needed during normal operation of the instrument. The following description serves as a
general overview.
4.4.5.1 General Test Features
All selftests are arranged in the "Setup" dialog, section "Maintenance > Selftest".
Fig. 4-9: Selftest dialog
In the dialog you can select one or several tests. Each selftest may be performed once
or continuously. Moreover you can save any configuration of the "Selftest" dialog to a
"profile" for later reuse.
Setup Dialog
To Next Page
Loading...
