Remote Control
R&S
®
CMW500
174User Manual 1173.9463.02 ─ 06
Fig. 5-2: Legend for figure above
The following table lists the assignment of network standards (and GPRF, DAU) to the
bits of the register STATus:OPERation:TASK:A. The mnemonics used to indicate the
network standards are identical to the mnemonics used in remote commands (see Firm-
ware Applications).
Table 5-2: Bit definition for register STATus:OPERation:TASK:A
Bit No. Network Standard
1 GPRF
2 GSM
3 WCDMa
4 WLAN
5 BLUetooth
6 WIMax
7 EVDO
8 CDMA
9 TDSCdma
10 LTE
12 DATA
The following table lists the assignment of the individual measurement, signaling and
generator applications to the bits of a function group register (STATus:OPERa-
tion:TASK:A:<network standard>:MEASurement<i> / ...:SIGNaling<i> / ...:GENera-
tor<i>).
The mnemonics for measurement and signaling applications are as far as possible iden-
tical to the mnemonics used in remote commands (see Firmware Applications).
Status Reporting System
To Next Page
Loading...
