Command Reference - Base Software
R&S
®
CMW500
259User Manual 1173.9463.02 ─ 06
Usage: Query only
Firmware/Software: V2.0.10
SYSTem:HELP:STATus[:REGister]?
Returns a list of paths for the STATus:OPERation registers.
Each path is represented by a string containing all registers from highest level down to
the individual register, separated by colons.
For the GPRF power measurement for example the following paths are listed:
"STATus:OPERation", "STATus:OPERation:TASK", "STATus:OPERation:
TASK:A", "STATus:OPERation:TASK:A:GPRF", "STATus:OPERation:TASK:
A:GPRF:MEASurement", "STATus:OPERation:TASK:A:GPRF:MEASurement:
POWer"
Usage:
Query only
Firmware/Software: V2.0.10
STATus:OPERation:CONDition?
STATus:OPERation:TASK:CONDition?
STATus:OPERation:TASK:A:CONDition?
STATus:OPERation:TASK:A:<netw_std>:CONDition?
STATus:OPERation:TASK:A:<netw_std>:<func_grp>:CONDition?
STATus:OPERation:TASK:A:<netw_std>:<func_grp>:<appl>:CONDition?
Returns the contents of the CONDition part of the status register, see Structure of an
SCPI Status Register. Reading the CONDition registers is nondestructive.
For a
description of the variables
<netw_std>, <func_grp> and
<appl> refer to
table 6-1.Return values:
<ConditionBits> Range: 0 to 65535 (decimal representation)
Example:
STAT:OPER:TASK:A:GPRF:GEN:UNIV:COND?
Query the CONDition part of the GPRF generator status register
to check the current generator state.
Usage: Query only
Firmware/Software: V1.0.4.11
STATus:OPERation:ENABle <MaskBits>
STATus:OPERation:TASK:ENABle <MaskBits>
STATus:OPERation:TASK:A:ENABle <MaskBits>
STATus:OPERation:TASK:A:<netw_std>:ENABle <MaskBits>
Instrument-Control Commands
To Next Page
Loading...
