Rohde & Schwarz CMW500 - Page 291

Command Reference - Base Software
R&S
®
CMW500
275User Manual 1173.9463.02 ─ 06
Example:
STATus:EVENt:BITS:NEXT?
Query and delete the next event.
Usage: Query only
Firmware/Software: V1.0.4.11
STATus:GENerator:CONDition:OFF? ['<RegExp>']
STATus:GENerator:CONDition:PENDing? ['<RegExp>']
STATus:GENerator:CONDition:ON? ['<RegExp>']
STATus:MEASurement:CONDition:OFF? ['<RegExp>']
STATus:MEASurement:CONDition:QUED? ['<RegExp>']
STATus:MEASurement:CONDition:RDY? ['<RegExp>']
STATus:MEASurement:CONDition:RUN? ['<RegExp>']
STATus:MEASurement:CONDition:SDReached? ['<RegExp>']
Lists all generator tasks or measurement tasks whose current state equals the state indi-
cated by the last mnemonic.
The results are collected from the CONDition parts of the lowest level registers of the
STATus:OPERation register hierarchy. They are returned as a comma separated list of
strings. Each string is composed of the complete path of the status register plus the
current state.
Query parameters:
'<RegExp>' Optional regular expression filtering the returned results, see also
Regular Expressions.
Example:
STATus:MEASurement:CONDition:RDY? 'GPRF'
List all tasks with current state "Ready". Limit the results to strings
containing 'GPRF'.
Usage: Query only
Firmware/Software: V1.0.4.11
6.3.13.5 STATus:QUEStionable
The STATus:QUEStionable subsystem controls the status reporting structures of the
STATus:QUEStionable register, see STATus:QUEStionable.
Unless otherwise stated, all of the following commands are SCPI-confirmed. Note that
*RST does not influence the status registers (see also Reset Values of the Status Report-
ing System).
The available commands are listed below.
STATus:QUEStionable:CONDition?.................................................................................276
STATus:QUEStionable:ENABle.......................................................................................276
STATus:QUEStionable[:EVENt]?.....................................................................................276
STATus:QUEStionable:NTRansition................................................................................277
STATus:QUEStionable:PTRansition.................................................................................277
STATus:QUEStionable:BIT<n>:CONDition?.....................................................................277
STATus:QUEStionable:BIT<n>[:EVENt]?.........................................................................277
Instrument-Control Commands