Rohde & Schwarz CMW500 - Page 295

Command Reference - Base Software
R&S
®
CMW500
279User Manual 1173.9463.02 ─ 06
SYSTem:DATE:LOCal <Year>, <Month>, <Day>
Sets the local date of the operating system calendar.
Parameters:
<Year> Range: four-digit number
<Month> Range: 1 to 12
<Day> Range: 1 to n (depending on the <Month>)
Example:
SYSTem:DATE:LOCal?
Query the local date. Possible response: 2012, 09, 20
Firmware/Software: V3.0.12
SYSTem:TIME[:UTC] <Hour>, <Minute>, <Second>
Sets the Universal Time Coordinated (UTC) of the operating system clock.
Parameters:
<Hour> Range: 0 to 23
<Minute> Range: 0 to 59
<Second> Range: 0 to 59
Example:
SYSTem:TIME:UTC?
Query the UTC. Possible response: 13, 09, 20
Firmware/Software: V3.0.12
SYSTem:TIME:LOCal <Hour>, <Minute>, <Second>
Sets the local time of the operating system clock.
Parameters:
<Hour> Range: 0 to 23
<Minute> Range: 0 to 59
<Second> Range: 0 to 59
Example:
SYSTem:TIME:LOCal?
Query the local time. Possible response: 15, 09, 20
Firmware/Software: V3.0.12
SYSTem:TIME:DSTime:MODE
Configures whether the operating system automatically adjusts its clock for Daylight
Saving Time (DST) or not.
Instrument-Control Commands