Rohde & Schwarz CMW500 - Page 36

Getting Started
R&S
®
CMW500
20User Manual 1173.9463.02 ─ 06
●
ON/OFF – starts a measurement from the OFF state or aborts a running measure-
ment. Switches generators or signaling generators on or off and selects/clears check-
boxes in dialogs (toggle function).
●
RESTART / STOP – restarts a measurement in the RDY state or stops a running
measurement.
●
ESC – terminates the current stage of a session, e.g. by closing a dialog.
●
CONTEXT – for future extensions
2.2.1.7 Data Entry Keys
The keys in the data entry keypad are used to enter numeric values and character data.
They are only enabled while the cursor is placed in a data input field.
●
0 to 9 – enter numbers (in numeric input fields) or characters (character input fields).
●
DOT, PLUS/MINUS:
– In numeric input fields, the keys enter the decimal point and change the sign of
the entered numeric value. Multiple decimal points are not allowed.
– In hexadecimal input fields, the keys enter the hex values E and F.
– In character input fields, the keys enter special characters and switch between
upper and lower case, respectively.
●
G/n, M/µ, k/m, x1:
– In numeric input fields, these keys multiply the entered value with factors of
10
(-)9
, 10
(-)6
, 10
(-)3
or 1 and add the appropriate physical unit.
– In hexadecimal input fields, the keys enter the hex values A to D.
– In character input fields, the keys have no effect.
●
BACKSPACE – deletes the last character before the cursor position or the selected
character sequence.
●
SHIFT – for future extensions
●
ENTER – activates the edit mode for the selected input field or confirms and termi-
nates the entry.
Instrument Tour