Getting Started
R&S
®
CMW500
38User Manual 1173.9463.02 ─ 06
● The extended soft-front panel emulates all front panel controls of an R&S CMW500
equipped with a display. It provides a graphical presentation of the front panel.
A horizontal screen resolution of 1280 pixels or higher is required to display the
extended soft-front panel.
To switch between compact and extended soft-front panel:
► Press F11 on an external keyboard.
The compact soft-front panel is displayed below. Each key on the soft-front panel has an
equivalent keyboard shortcut. The following table lists these shortcuts (and some addi-
tional ones).
Table 2-1: (Soft-)front panel keys and keyboard shortcuts
Key Shortcut
RESET CTRL + R
INFO CTRL + I
SAVE CTRL + S
SETUP CTRL + E
PRINT CTRL + P
HELP F1
DEVICE CTRL + D
WIZARD CTRL + W
BLOCK VIEW CTRL + B
MEASURE CTRL + M
SIGNAL GEN CTRL + G
ON | OFF CTRL + ENTER
RESTART | STOP CTRL + SHIFT + ENTER
TASKS CTRL + TAB
SYS Windows logo key + D, CTRL + ALT + D
PREV SHIFT + TAB
NEXT TAB
hotkeys, left to right ALT + 1 to 8
softkeys, top down CTRL + 1 to 8
G/n CTRL + F12
M/µ CTRL + F11
k/m CTRL + F10
x1 CTRL + F9
Operating the Instrument
To Next Page
Loading...
