Getting Started
R&S
®
CMW500
43User Manual 1173.9463.02 ─ 06
Test 1:
●
Adjustment (measurement of correction values) and verification with the latest official
software.
●
Upgrade to the new software and verification.
Test 2:
●
Adjustment and verification with the new software.
●
Downgrade to the latest official software and verification.
The tests are passed if all verification results show comparable values.
Rohde & Schwarz is certified according to ISO 9001 since May 1995.
2.5.2.4 R&S Software Distributor
The "R&S Software Distributor" is a software utility that is opened when a R&S CMW500
setup file is started.
Fig. 2-6: R&S Software Distributor
The software distributor can initiate a local or a remote installation.
1.
Select "Local Installation" if you start your setup file from the R&S CMW500 hard disk
or an external storage medium (USB memory stick, CD-ROM with external drive)
connected to the instrument.
2. Select "Remote Installation" if your setup files are on an external host computer that
is connected to your R&S CMW500.
Administrative Tasks
To Next Page
Loading...
