Getting Started
R&S
®
CMW500
50User Manual 1173.9463.02 ─ 06
Shock hazard
Before replacing a fuse, make sure that the instrument is switched off and disconnected
from all power supplies.
Always use fuses supplied by Rohde & Schwarz as spare parts, or fuses of the same
type and rating.
To replace the fuses
1. Open the lid of the AC power connector.
2. Lift the fuse holder out of its slot.
3. Exchange the two fuses.
4. Put the fuse holder back in its slot and close the lid.
Maintenance
To Next Page
Loading...
