Rohde & Schwarz PR100 - Page 167

R&S PR100 User Manual
d
OUTPut
. :TONE
. . :GAIN <numeric_value>|MINimum|MAXimum|UP|DOWN
Setting of tone gain. See also OUTP:TONE:THR for a description of its use.
Parameters:
<numeric_value> Tone gain in Octave/ <numeric_value>dB
MINimum|MAXimum setting the lowest/highest tone gain
Remark:
The range can be set in discrete steps. Intermediate values are therefore
rounded to the nearest discrete value.
Example:
OUTPut:TONE:GAIN 20
d
OUTPut
. :TONE
. . :GAIN? [MINimum|MAXimum]
Query of tone gain
Parameters:
none query of current tone gain
MINimum|MAXimum query of lowest/highest tone gain
Result:
Tone gain in Octave/ <numeric_value>dB
Example:
OUTPut:TONE:GAIN? -> 20