Rohde & Schwarz PR100 - Page 208

R&S PR100 User Manual
[SENSe]
. :MSCan
. . :LIST
. . . :STARt <numeric_value>|MINimum|MAXimum
Sets the memory list item from which a memory scan starts. A start location
that is larger than the stop location is rejected with error -221(“Settings
conflict”).
Parameters:
<numeric_value> integer number in the range [0,1023]
MINimum|MAXimum set lowest|highest start location
Example:
SENSe:MSCan:LIST:STARt 60
[SENSe]
. :MSCan
. . :LIST
. . . :STARt? [MINimum|MAXimum]
Query of first memory list item for a scan.
Parameter:
<numeric_value> query of current start location
MINimum|MAXimum query of lowest|highest possible start location
Result:
integer number in the range [0,1023]
Example:
SENSe:MSCan:LIST:STARt? -> 60