Rohde & Schwarz PR100 - Page 212

R&S PR100 User Manual
d
[SENSe]
. :PSCan
. . :STEP <numeric_value>|UP|DOWN|MINimum|MAXimum
Sets the resolution of an RF-panorama scan. Essentially, it sets the channel-
spacing of the FFT samples: i.e. the FFT-bin width.
Parameters:
<numeric_value> frequency spacing of FFT samples
UP|DOWN next/previous possible resolution
MIN|MAX set to narrowest|widest possible resolution
Example:
SENSe:PSCan:STEP 10 kHz
d
[SENSe]
. :PSCan
. . :STEP? [MINimum|MAXimum]
Output of current channel spacing for PSCan.
Parameters:
none Current bandwidth
MINimum Narrowest possible bandwidth
MAXimum Widest possible bandwidth
Result:
Bandwidth in Hz
Example:
SENSe:PSCan:STEP? 10000