Rohde & Schwarz PR100 - Page 217

R&S PR100 User Manual
d
[SENSe]
. :SWEep
. . :COUNt <numeric_value>|MINimum|MAXimum|INFinity
Sets the number of sweeps. This value is mapped onto the same variable as
the memory scan and panorma scan count variable, meaning that a change
affects all scan modes.
Parameters:
<numeric_value> number of sweeps
MINimum|MAXimum minimum|maximum number
INFinity infinite number
Example:
SWEep:COUNt 100
d
[SENSe]
. :SWEep
. . :COUNt? [MINimum|MAXimum]
Query of number of sweeps.
Parameters:
none query of current number of sweeps
MINimum|MAXimum query of minimum|maximum sweeps
Result:
Number of sweeps; 9.9E37 is output for an infinite number
Example:
SWEep:COUNt? -> 100