Rohde & Schwarz PR100 - Page 234

R&S PR100 User Manual
SYSTem
. :COMMunicate
. . :SOCKet
. . . :DHCP
. . . . [:STATe] <Boolean>
Determines whether the IP address is set automatically by the DHCP protocol.
Parameters:
ON Turn DHCP on (IP address determined by DHCP server in network)
OFF Turn DHCP on (IP address must be set manually)
Example:
SYSTem:COMMunicate:SOCKET:DHCP:STATe ON
SYSTem
. :COMMunicate
. . :SOCKet
. . . :DHCP
. . . . [:STATe]?
Query state of DHCP.
Parameter:
none
Result:
0, 1
Example:
SYSTem:COMMunicate:SOCKet:DHCP:STATe? -> 1