Rohde & Schwarz PR100 - Page 259

R&S PR100 User Manual
d
TRACe|DATA
. :UDP
. . :DEFault
. . . :TAG
. . . . :OFF <ip-address> , <ip-port>, <tag> {, <tag>}
Changes the UDP-address of the default address and removes the specified
tags if present.
Parameters:
<ip-address> string representing IP dot notation of IP address (e.g.
172.17.75.18)
<numeric_value> integer port number in the range [0,65535] (16 bit)
<tag> See Table 19 for tag in Section 12.1.
*RST state:
The “*RST” command has no effect on these settings.
After a power down, the UDP-address list only contains the default entry
(index 0). The default is retained.
Example:
TRACe:UDP:DEFault:TAG:OFF “123.456.789.012”, 5555, MSC, FSC