R&S PR100 User Manual
FScan stop frequency low (4 bytes)
FScan frequency step (4 bytes)
FScan start frequency high (4 bytes)
FScan stop frequency high (4 bytes)
reserved (2bytes)
trace data: (where n = <trace number of items>)
n times short, in case <trace selector flags> has LEVEL set
n times long, in case <trace selector flags> has OFFSET set
n times short, in case <trace selector flags> has FSTRENGTH set
n times short, in case <trace selector flags> has CHANNEL set
n times unsigned long, in case <trace selector flags> has FREQ_LOW set
n times unsigned long, in case <trace selector flags> has FREQ_HIGH set
To Next Page
Loading...
