100
Arranging audio samples to create a song—Sequence
Cutting a phrase—Cut
When you cut a phrase, subsequent phrases will be moved forward.
fig.34-14
1. Press PAD SEQUENCING [EDIT].
[EDIT] lights, and the Sequence Edit menu are displayed as icons.
fig.34-10
2. Press CURSOR [ ] to select the Cut
icon.
3. Press [YES/ENTER].
fig.34-10
The Cut Phrase screen appears.
4. Press CURSOR [ ].
fig.34-10
A sequence track select mini-menu appears.
5. Turn the TIME/VALUE dial to select the sequence track (A–D) that you wish to
edit, and press [YES/ENTER].
A mini-menu disappears.
6. Use the REW [ ] /FF [ ] or the TIME/VALUE dial to select the phrase that
you wish to cut.
The currently selected phrase will be highlighted in black.
7. After you have specified the cut phrase, and press [YES/ENTER].
The specified phrase is cut.
8. When you are finished editing the sequence track, press [DISPLAY].
[EDIT] goes out (extinguished), and the display returns to the Basic screen.
1 2
3
3
14
45
5
If [SEQ PLAY] is off, press
[EDIT], and it will be turned
on (lit) automatically. Also, the
[STATUS] of all audio tracks
will go dark.
In step 5, also press
[NO/EXIT], a mini-menu
disappears.
To cancel the cut, press
[UNDO/REDO] (p. 138) after
step 7.
To Next Page
Loading...
