82
Editing the sample of a pad
Copying a sample to another pad—
Clipboard
By temporarily pasting a sample into the clipboard, you can easily copy a sample
from one pad to another.
1. Hold down the pad of the sample you wish to move (the pad lights), and press
[CLIP BOARD].
[CLIP BOARD] is illuminated.
* If [CLIP BOARD] already contains a sample, that is overwrited the existing sample.
2. Press [CLIP BOARD] to verify that the sample sounds.
3. Hold down [CLIP BOARD] and press the destination pad.
[CLIP BOARD] goes out, and the destination pad lights.
* If the destination pad already contains a sample, you cannot copy a sample.
4. Press the destination pad to verify that the sample sounds.
The sample of the PAD are
unable to be played back
simultaneously while playing
the sample of [CLIP BOARD].
Deleting a sample of [CLIP BOARD]
If you wish to delete a sample of [CLIP BOARD], hold [DELETE] and press
[CLIP BOARD].
To Next Page
Loading...
