103
Arranging audio samples to create a song—Sequence
Arranging audio samples
to create a song
Dividing the phrase at the current location—Split
This function splits the phrase at “NOW” (the current location). By dividing a phrase,
you can delete a portion of the phrase or paste it into another location.
fig.34-20
1. Press PAD SEQUENCING [EDIT].
[EDIT] lights, and the Sequence Edit menu are displayed as icons.
fig.34-10
2. Press CURSOR [ ] to select the Split
icon.
3. Press [YES/ENTER].
ig.34-10
The Split Phrase screen appears.
4. Press CURSOR [ ].
ig.34-10
A sequence track select mini-menu appears.
5. Turn the TIME/VALUE dial to select the sequence track (A–D) that you wish to
edit, and press [YES/ENTER].
A mini-menu disappears.
6. Use the REW [ ] /FF [ ] or the TIME/VALUE dial to set the split
destination to “NOW.”
The currently selected phrase will be highlighted in black.
7. After you have specified the split phrase, press [YES/ENTER].
The specified phrase is spitted at “NOW.”
8. When you are finished editing the sequence track, press [DISPLAY].
[EDIT] goes out (extinguished), and the display returns to the Basic screen.
1 2
2'
3
13
45
4 52
If [SEQ PLAY] is off, press
[EDIT], and it will be turned
on (lit) automatically. Also, the
[STATUS] of all audio tracks
will go dark.
In step 5, also press
[NO/EXIT], a mini-menu
disappears.
If you wish to make precise
adjustments to the location at
which the phrase will be
divided, it is convenient to use
Preview. Refer to “Cueing to a
precise location---Preview”
(p. 139).
To cancel the split, press
[UNDO/REDO] (p. 138) after
step 7.
To Next Page
Loading...
