107
Arranging audio samples to create a song—Sequence
Arranging audio samples
to create a song
Deleting a sequence track
An unwanted sequence track can be deleted as follows.
1. Press PAD SEQUENCING [EDIT].
[EDIT] lights, and the Sequence Edit menu are displayed as icons.
fig.34-23
2. Press CURSOR [ ] to select the Erase
Track icon.
3. Press [YES/ENTER].
fig.34-23
The erase track setting screen appears.
4. Turn the TIME/VALUE dial to specify the track number you wish to delete.
5. Press [YES/ENTER].
The sequence track will be deleted.
6. When you are finished editing the sequence track, press [DISPLAY].
[EDIT] goes out (extinguished), and the display returns to the Basic screen.
If [SEQ PLAY] is off, press
[EDIT], and it will be turned
on (lit) automatically. Also, the
[STATUS] of all audio tracks
will go dark.
To cancel the erase sequence
track, press [UNDO/REDO]
(p. 138) after step 5.
To Next Page
Loading...
