49
How to play an audio CD—the CD Player
How to play an audio CD
Playing and stopping a song
Here’s how to play an audio CD on the CDX-1.
Playing/stopping an audio CD
1. Insert an audio CD as described in “Inserting a disc” (p. 35).
fig.2-02
The CD Player screen appears.
2. Move the AUDIO CD fader (AUDIO TRACK 7-8 fader) to approximately 0 dB.
fig.2-03
* You can make settings so that the volume of an
audio CD will be adjusted only by the MASTER
fader, without using the AUDIO CD fader
(AUDIO TRACK 7-8 fader). In this case, the
AUDIO CD fader (AUDIO TRACK 7-8 fader) will
have no effect, so step 2 will not be necessary. For
details refer to “Changing the way in which audio
CD volume is adjusted” (p. 52).
3. Lower the MASTER fader of the CDX-1.
4. Press PLAY [].
The song is played back.
5. Raise the MASTER fader to adjust the master.
6. Press STOP [ ].
The song stops.
If [SEQ PLAY] lights, the song
will not be played back.
You can play back an audio
CD on the CDX-1 and sample
favorite phrases from the CD.
For details on operation, refer
to “Sampling from a CD audio
clip collection inserted in the
CDX-1” (p. 57).
To Next Page
Loading...
