55
Recording a sound to a pad—Sampling
Recording a sound to a pad
Naming a pad bank
Each of the 64 pad banks can be given a name of up to ten characters. If you have
assigned names to the pad banks, it will be easier to select the desired bank.
For clarity, you may wish to use pad bank names like the examples given below.
• Types of samples
Examples: “DrumLoop1,” “Male Voice,” “SFX”
• Dates on which you sampled
Examples: “Jan.1, 01” “5/12 pm9:30”
1. Select the pad bank to which you wish to assign a name (refer to the preceding
section).
2. Press PAD RECORDING [TEMPO MATCH] twice.
Alternatively, you can press [TEMPO MATCH] and then press CURSOR [ ].
fig.31-03
The Pad Edit menu are displayed as icons.
fig.31-03
3. Press CURSOR [ ] to select the Bank
Parameter icon.
4. Press [YES/ENTER].
fig.31-04
The Bank Parameter screen appears.
5. Press CURSOR [ ] to move the cursor to “Name” line.
6. Use CURSOR [ ] [ ] to move to the desired character location, and turn
the TIME/VALUE dial to input the desired character.
7. Press [DISPLAY] to return to the Basic screen.
To Next Page
Loading...
Need help?
General
