Roland DiscLab CDX-1 User Manual

37
Basic operation of the CDX-1
Basic operation of the CDX-1
Switching among the Basic screens
The basic display screens of the CDX-1 are accessed by pressing [DISPLAY], located
below the screen. As described below, there are five Basic screens, which you can
cycle through by pressing [DISPLAY].
* The AUDIO CD PLAYER indicator and/or the AUDIO CD RECORDER indicator is lit,
pressing [DISPLAY] will cycle you through the CD Player screen and Sequence Play List screen
displays.
However, CD RECORDER [ ] blinks (recording-standby mode), only the CD Recorder
screens will be displayed.
The Basic screens
Post-fader (level meter) screen
fig.15-10
This screen shows the levels after the signals have passed through the audio track
faders (post-fader). During multitrack recording (p. 113), the meters indicate the
recording levels of those tracks.
Pre-fader (level meter) screen
fig.15-11
This screen shows the levels before the signals have passed through the audio track
faders (pre-fader). Use the Pre-fader screen when you wish to check the input levels.
Big Time screen
fig.15-12
The current location of the song will be displayed in large characters using the full
size of the display.The units indicated can be switched “Measure/Beat /Tick” or
“Hour/Minute/Second/Frame.”
➔ Refer to “Switching the Big Time display.“(p. 38)
Sequence Play List screen
fig.15-13
This screen shows the status of the sequence (p. 88). The location and length of the
boxes (rectangles) indicates how phrases are arranged in the sequence track.
Song Information screen (at the time of using CD-RW disc)
This screen shows information about the song (CD-RW disc).
➔
Refer to “Viewing information on the song (CD-RW disc)–Song Information
screen.“(p. 39)
CD Player screen (p. 48)

Roland DiscLab CDX-1 Specifications

General

Brand	Roland
Model	DiscLab CDX-1
Category	Recording Equipment
Language	English