Roland DiscLab CDX-1 User Manual

40
Basic operation of the CDX-1
Returning the CDX-1 to the factory
settings—Initialize
The current settings of the CDX-1 can be returned (initialized) to the factory settings.
The following parameters can be initialized.
●
Global Parameter
• Tuner parameters
• System parameters
• MIDI parameters
• Marker parameters
• Tempo map parameters
●
Effect patch data
All user patches: U001–U100
●
Mixer parameters
PAN, EQ, DELAY, REVERB, Effects location, Master balance
Here we will describe the procedure for initializing the Global parameters.
1. Press [UTILITY].
The Menu are displayed as icon.
fig.15-16
2. Press CURSOR [ ] to select an
Initialize icon
3. Press [YES/ENTER].
The Initialize Menu are displayed as icon appears.
fig.15-17
4. Make sure that the cursor is located at the
Initialize Global Parameters icon
5. Press [YES/ENTER].
The display will ask “Initialize Global Param. Are you sure?”
6. When you wish to initialize, press the [YES/ENTER].
To cancel the operation, press [NO/EXIT].
When initialization is complete, you’re returned to the Basic screen.
For details on each parameter
and its default value, refer to
“Parameter list” (p. 208).
To initialize other parameters,
select the icon for the
parameters you wish to
initialize in step 3. For the
meaning of the Initialize icons,
refer to the separate column
“The meaning of each Initialize
icon” (p. 41).

Roland DiscLab CDX-1 Specifications

General

Brand	Roland
Model	DiscLab CDX-1
Category	Recording Equipment
Language	English