203
Insert effect algorithm list
Insert effect algorithm list
● [TRM] TRM/PAN (Tremolo/Pan): Tremolo is an effect that creates a cyclic change in volume.
Pan cyclically moves the stereo position between left and right (when stereo output
is used).
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the tremolo/pan effect on/off.
Mode (Mode) Selection for tremolo or pan. And selection for the effect will use.
TRM-TRI The volume will change cyclically. Smooth change will be produced.
TRM-SQR The volume will change cyclically. Abrupt change will be produced.
PAN-TRI The sound will be moved cyclically between left and right. Smooth change
will be produced.
PAN-SQR The sound will be moved cyclically between left and right. Abrupt change
will be produced.
Rate (Rate) 0–100 Adjust the rate at which the effect will operate.
Depth (Depth) 0–100 Adjusts the depth of the effect.
● [S.ATK] SLO ATK (Slow Attack): This produces a volume-swell effect (“violin-like” sound).
Effect On/Off (Effect On/Off) OFF, ON This parameter turns the slow attack effect on/off.
Rise Time (Rise Time) 10–2000 mS This adjusts the time needed for the volume to reach its maximum from the
moment you begin picking.
Level (Level) 0–100 Adjust the volume of the slow attack sound.
To Next Page
Loading...
Need help?
General
