EasyManua.ls Logo

Roland MDX-40A - Page 10

Roland MDX-40A
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
To Ensure Safe Use
8
This machine weighs 65 kg (144 lb.)
CAUTION
Unloading and emplacement are op-
erations that must be performed by 4
persons or more.
Tasks that require undue effort when
performed by a small number of persons
may result in physical injury. Also, if
dropped, such items may cause injury.
Install in a location that is level and
stable.
Installation in an unsuitable location
may cause an accident, including a fall
or tipover.
The cutting waste or workpiece may catch re or pose a health hazard.
WARNING
Never attempt to cut magnesium or
any other such ammable material.
Fire may occur during cutting.
Keep open ame away from the work
area.
Cutting waste may ignite. Powdered ma-
terial is extremely ammable, and even
metal material may catch re.
When using a vacuum cleaner to take
up cutting waste, exercise caution to
prevent re or dust explosion.
Taking up ne cuttings using an ordinary
vacuum cleaner may cause danger of
re or explosion. Check with the manu-
facturer of the vacuum cleaner. When
the safety of use cannot be determined,
clean using a brush or the like, without
using the vacuum cleaner.
CAUTION
Wear dust goggles and a mask. Wash
away any cutting waste remaining on
the hands.
Accidentally swallowing or inhaling
cutting waste may be hazardous to the
health.

Table of Contents

Other manuals for Roland MDX-40A

Related product manuals