Roland MDX-40A - Page 12

To Ensure Safe Use
10
WARNING
Never place any flammable object
nearby. Never use a combustible
aerosol spray nearby. Never use in
any location where gases can ac-
cumulate.
Combustion or explosion may be a
danger.
Handle the power cord, plug, and
electrical outlet correctly and with
care. Never use any article that is
damaged.
Using a damaged article may result in
re or electrical shock.
When using an extension cord or
power strip, use one that adequately
satises the machine’s ratings (for
voltage, frequency, and current).
Use of multiple electrical loads on a
single electrical outlet or of a lengthy
extension cord may cause re.
When the machine will be out of use
for a prolonged period, disconnect
the power cord.
This can prevent accidents in the
event of current leakage or unintended
startup.
Connect to ground.
This can prevent re or electrical shock
due to current leakage in the event of
malfunction.
Position so that the power plug is
within immediate reach at all times.
This is to enable quick disconnection
of the power plug in the event of an
emergency. Install the machine next to
an electrical outlet. Also, provide enough
empty space to allow immediate access
to the electrical outlet.
WARNING
Never use cutting oil.
This machine is not designed for the
ow of cutting oil. Oil may get inside
the machine and cause re or electrical
shock.
Never use a pneumatic blower.
This machine is not compatible with a
pneumatic blower. Cutting waste may
get inside the machine and cause re
or electrical shock.
If sparking, smoke, burning odor,
unusual sound, or abnormal opera-
tion occurs, immediately unplug the
power cord. Never use if any compo-
nent is damaged.
Continuing to use the machine may
result in re, electrical shock, or injury.
Contact your authorized Roland DG
Corp. dealer.