To Ensure Safe Use
12
Warning Labels
Warning labels are afxed to make areas of danger immediately clear. The meanings of
these labels are as follows. Be sure to heed their warnings.
Also, never remove the labels or allow them to become obscured.
Caution: Sharp Tool
Inadvertent contact
may cause injury.
Caution: High Tem-
perature
Never touch imme-
diately after cutting
operation.
Front
Rear
Caution: Pinching Hazard
Be careful not to allow the n-
gers to become pinched when
closing the cover.
Never use a pneumatic
blower.
This machine is not com-
patible with a pneumatic
blower. Cutting waste may
get inside the machine
and cause re or electrical
shock.
Caution: High Voltage
Cover removal may
pose hazard of shock or
electrocution due to high
voltage.
To Next Page
Loading...
Need help?
General
