Navigating the Web Interface
Before You Begin: Preconfiguring the AP
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 111
2 In the address or location bar, type the IP address of the AP. Default IP address
for standalone Ruckus Wireless APs:
192.168.0.1
3 Press <Enter> to connect to the Web interface.
4 If a Windows security alert dialog box appears, then click Yes or OK or Proceed
anyway (depending on the browser) to continue. The Ruckus Wireless Admin
login page appears.
5 In Username, type
super.
6 In Password, type
sp-admin.
7 Click Login.
The Ruckus Wireless AP Web interface appears.
To Next Page
Loading...
