Introducing the Ruckus Wireless AP
Getting to Know the AP Features
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 22
ZoneFlex 7341 AP
NOTE The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The SmartZone software-compatible images only
support Ruckus Wireless SCG, SZ and vSZ controllers. The ZD-compatible images
only support ZD controllers.
The 7341 requires a minimum of AP base image 100.0.0 and later to operate, or
Ruckus Wireless controllers 1.0 and later, vSZ 2.5 and later, or ZD 9.0 and later to
operate.
ZoneFlex 7341 includes five LEDs on its front panel and buttons and connectors
on its rear panel.
Front Panel
Figure 6 shows the front panel of the ZoneFlex 7341. For a description of each front
panel part, refer to Ta b l e 7.
Figure 6. ZoneFlex 7341 front panel
Table 7. ZoneFlex 7341 front panel elements
LED Description
PWR LED • Off: Off.
• Red: Boot up in process.
• Green: On.
OPT LED Not used in this model.
To Next Page
Loading...
