Managing the AP
Enabling Other Management Access Options
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 167
Enabling Other Management Access Options
In addition to managing the AP via a Web browser through HTTPS, several other
management access options are available on the AP. These options include
management access via HTTP, Telnet, and SSH.
You can also view and set up the connection to a Ruckus Wireless FlexMaster server
under the TR-069/SNMP Management Choice options. If your Ruckus Wireless
device is to be managed by FlexMaster, then the FlexMaster information (server URL
and contact interval) is preconfigured before you receive your Ruckus wireless
device.
NOTE If you are configuring the AP to be managed by FlexMaster, remember to
point it to the FlexMaster server after you configure the management access options.
For more information, refer to “Viewing FlexMaster Management Status” on
page 171.
1 Go to Administration > Management. The Management page appears.
Figure 80. The Administration > Management page
2 Review the access options listed in Ta b l e 5 6 , and then make changes as needed.
Table 56. Management Access Options
Option Description
Telnet Access By default, this option is disabled (inactive).
To Next Page
Loading...
