Configuring the AP
Configuring Wireless Settings
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 143
Rate Limiting
Rate Limiting allows you to cap the per client data transfer rates for a specific WLAN.
1 Go to Configuration > Wireless or Configuration > Radio 2.4G or
Configuration > Radio 5G.
2 Select the WLAN number that you want to configure from the tabs at the top of
the page.
3 Click the Edit Settings button next to Rate Limiting. The Rate Limiting page
appears.
Figure 67. Limit per station traffic rates on a specific WLAN
4 Set the maximum Downlink and Uplink rate per station.
5 The table under the Downlink and Uplink selections updates to show the
maximum transfer rate per station for each traffic type.
6 Click Update Settings to save your changes.
To Next Page
Loading...
