Managing the AP
Running Diagnostics
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 181
Running Diagnostics
Two network connection diagnostic tools – ping and traceroute – have been built
into the AP to help you check network connections from the Web interface.
1 Go to Administration > Diagnostics. The Administration > Diagnostics page
appears. Two options are available:
•Ping
•Traceroute
2 Click the text field by the option you want to activate, and type the network
address of a site.
3 Click Run Test.
The results appear in the text field below each option.
Figure 85. Pinging a device
To Next Page
Loading...
