Configuring the AP
Configuring Wireless Settings
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 126
Configuring Wireless Settings
This section describes how to configure the wireless settings of the AP. There are
two types of wireless settings that you need to configure:
• Configuring Common Wireless Settings: Includes the wireless mode, country
code, and advanced wireless settings, such as the wireless transmit power and
wireless protection mode. These settings are applied to all WLANs.
• Configuring Wireless # (WLAN Number) Settings: The Wireless # tabs (“Wireless
1” through “Wireless 8” on the 2.4GHz radio and “Wireless 9” through “Wireless
16” on the 5GHz radio) provide settings for customizing each WLAN individually.
Refer to the sections below for instructions on how to configure each set of wireless
settings:
• Configuring Common Wireless Settings
• Configuring Common Advanced Settings
• Configuring Wireless # (WLAN Number) Settings
To Next Page
Loading...
