Configuring the AP
Configuring Wireless Settings
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 132
Configuring Wireless # (WLAN Number) Settings
The AP provides up to eight wireless LANs per radio that can be individually
configured to provide different kinds of services for different kinds of wireless clients,
traffic types or different user groups. Each WLAN can be configured with separate
security settings, VLANs, access controls and rate limiting policies, among other
settings.
1 Go to Configuration > Wireless (or Configuration > Radio 2.4G/Radio 5G).
The Configuration > Wireless > Common page appears.
2 Click one of the eight Wireless (#) tabs. The Configuration > Wireless > Wireless
[#] page appears.
Figure 62. Wireless # (WLAN number) settings
3 Review the WLAN options listed in Tab l e 4 6 , and then make changes as required.
Table 46. WLAN options
Option Description
Wireless Network This wireless network name is for management purposes only,
and is not visible to the user.
Wireless Availability This option controls whether or not the wireless network is
available to users (Enabled or Disabled).
To Next Page
Loading...
