Introducing the Ruckus Wireless AP
Getting to Know the AP Features
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 53
ZoneFlex R300 AP
The R300 is a high-capacity, high-performing, two-stream, dual-band, 802.11n AP
with adaptive antenna technology for carriers and enterprises.
NOTE The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The SmartZone software-compatible images only
support SCG, SZ and vSZ controllers. The ZD-compatible images only support ZD
controllers.
The R300 AP requires a minimum of AP base image 100.0.0 and later to operate,
or SCG 2.5 and later, vSZ 2.5 and later, SmartZone software 3.2 and later, or ZD
9.6.1 and later to operate.
The R300 includes five LEDs on its front panel and buttons and connectors on its
rear panel.
NOTE The R300 is an entry level 802.11n dual-band AP that does not support the
Smart Mesh or Spectrum Analysis features, and supports a maximum of 250
unencrypted clients.
Front Panel
Figure 24 shows the top view of the R300. For a description of each front panel
part, refer to Ta bl e 26 .
Figure 24. R300 top view
To Next Page
Loading...
