Configuring the AP
Configuring Internet Settings
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 121
• IPv4 Gateway: Enter the gateway IP address of the Internet interface.
5 To allow the DNS mode to be determined automatically, set IPV4 DNS Mode to
Auto.
To set the DNS mode manually, set IPV4 DNS Mode to Manual. Then enter the
following:
• IPv4 Primary DNS Server: The IP address of the primary Domain Name
System (DNS) server.
• IPv4 Secondary DNS Server: The IP address of the secondary DNS server.
6 Continue with Step 7 or Step 9.
Static IPv6
7 In IPv6 Connection Type, select Static IP.
8 When the Internet Connection Settings options appear, you can make changes
to the following settings:
• IPv6 Primary DNS Server: The IP address of the primary Domain Name
System (DNS) server.
• IPv6 Secondary DNS Server: The IP address of the secondary DNS server.
• IPv6 Address: Enter the static IP address that you want to assign to the AP
in IPv6 (colon-separated) format.
• IPv6 Prefix Length: Enter the prefix length for the network.
• IPv6 Gateway: Enter the gateway IP address of the Internet interface.
9 Click Update Settings to save your changes.
To Next Page
Loading...
