Configuring the AP
Configuring Wireless Settings
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 136
Figure 63. WEP settings
4 Review the encryption settings listed in Tab le 4 7 , and then make changes as
required.
Table 47. WEP Options
Encryption Setting Description
Authentication Mode Open is the only authentication mode available with WEP
encryption.
Encryption Strength • 64 bit: Specify the key with 10 hexadecimal digits or 5 ASCII
characters.
• 128 bit: Specify the key with 26 hexadecimal digits or 13
ASCII characters. The 128-bit cryptography is stronger
privacy protection for your network and is recommended if
you use WEP.
Key Entry Method • Hexadecimal: The encryption key only accepts
hexadecimal characters (0-9, A-F).
• ASCII Text: The encryption key accepts ASCII characters.
WEP Key Enter the key manually according to the Key Entry Method
and Encryption Strength settings.
Key Index Choose the index, from “1” to “4”, that the WEP key is to be
stored in.
To Next Page
Loading...
