Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A 188
• The R710’s 802.3af PoE operating mode, which limits AP functionality so as to
remain within the standard 802.3af PoE power budget, requires that one
Ethernet port be disabled. As such, an AP in 802.3af PoE operating mode cannot
be configured to bond its Ethernet ports with LACP.
NOTE Refer to ZoneFlex R710 AP for a description of the feature and function
limitations imposed under the 802.3af PoE operating mode.
This means LACP is supported as long as the R710 AP is powered via:
• 802.3at PoE+
• Passive PoE injector capable of at least 20W
• 12V DC power supply
NOTE The switch port must support link layer discovery protocol (LLDP) power
over Ethernet/MDI (PoE+) so the R710 can operate in full-power mode.
To Next Page
Loading...
