1. BEFORE OPERATION
1－2
Please operate this system taking the contents of the following description into consideration.
A misoperation will lead to an unexpected accident or damage.
1.1 Precaution on Unpacking
When unpacking this product after purchasing, care is needed to the following.
• When unpacking the Servo Amplifier, don't touch its printed circuit boards in any case.
1.2 Confirmation of the Product
Check the following after receiving the product. Contact us if any abnormality is detected.
• Check if the model numbers of the Servomotor and the Servo Amplifier match those of the ordered ones
(the numbers are described after "MODEL" on the main nameplate).
• Check the appearance of the Servomotor and the Servo Amplifier to confirm that they are free from any
abnormality such as breakage or lack of parts.
• Check that all screws on the Servomotor and the Servo Amplifier are tightened properly.
1.3 Precautions on Operation
Take care the following during operation.
• At installation, don't give shocks to the Servomotor and the Servo Amplifier, or they may break.
In particular, handle the Servomotor carefully since it is provided with a sensor.
To Next Page
Loading...
