9. SPECIFICATIONS
9－49
9.1.14 Calorific Value
Table 9-13 shows the calorific values of the PY2 Servo Amplifier under the rated load.
Table 9-13 Calorific Values of PY2 Servo Amplifiers (1/2)
Amplifier model No. Motor model No.
Total calorific values of
Servo Amplifier
P30B04003D 15
P30B04005D 16
P30B04010D 19
P30B06020D 26
P50B03003D 15
P50B04006D 16
P50B04010D 18
P50B05005D 17
P50B05010D 19
P50B05020D 22
P50B07020D 26
PY2A015
P50B07030D 27
P10B10030H 30
P10B10075H 48
P10B13050H 40
P10B13050B 34
P10B13100B 50
P20B10100H 45
P30B06040D 32
P30B08075D 45
P50B07040D 34
P50B08040D 35
P50B08050D 39
P50B08075H 41
P50B08100H 46
P60B13050H 43
PY2A030
P80B15075H 54
P10B13100H 78
P10B13150H 103
P10B13150B 75
P10B18200B 97
P20B10100D 68
P20B10150D 82
P20B10150H 70
P20B10200H 88
P50B08075D 59
P50B08100D 67
P60B13100H 74
P60B13150H 89
PY2A050
P80B18120H 94
1 Since the values in the table do not include the calorific values of an external regenerative
resistor, they must be added as required.
2 When an external regenerative resistor is used, change the addition term of the external
regenerative resistor calorific value depending on the installation place.
3 Regarding installation, strictly observe the installation procedure described in "5.
Installation".
To Next Page
Loading...
