Sanyo SUPER BL P5 - Resetting and Turning the Power off

6. OPERATION
6－12
12 Return to original mode.
Push the and keys so that the
right screen will appear.
The key in the 7-segment LED flickers.
By this, the JOG operation ends.
＊
Mode select
＊
Push
〔
0
〕
to
〔７〕
ke
y
6.3.3 Resetting and Turning the Power Off
13 Change the remote operator setting and reset the
OT.
Then, operate the remote operator according to the
following procedure.
Repeat pushing the , and
or keys until the right screen appears.
Push the , and keys so that the
right screen will appear.
Push the key so that the right screen will
appear, completing operation.
＊
Para. Set3 1
Func0 : 00100000
＊
Para. Set3 1
Func0 : 00000000
WR
Completed 1
Func0 : 00000000
14 Turn off the 200 VAC of R-S-T.
15 Turn off the 200 VAC of r-t.
16 If the brake is fitted with the motor, turn off the brake
power.
d
０
2
0