Sanyo SUPER BL P5 - Optional Peripheral Equipment List

3. SERVO SYSTEM CONFIGURATION
3－6
3.4 Optional Peripheral Equipment List
The following optional peripheral devices are available for the PY2 Servo Amplifiers.
Please order as necessary.
● I/O connectors
The table below lists I/O connector plugs and housings.
(Connectors of standard shapes are listed as optional equipment.)
Connector List for PY2A (200 VAC input type)
Application Model No. Set contents Maker Maker’s model No.
10150-3000VE
AL-00385594 CN1 plug and housing Sumitomo 3M
10350-52A0-008
10120-3000VE
AL-00385596 CN2 plug and housing Sumitomo 3M
10320-52A0-008
AL-00329461-01 CNA plug Phoenix Contact MSTB2.5/5-STF-5.08
AL-00329458-01 CNB plug Phoenix Contact IC2.5/3-STF-5.08
AL-00329460-01 CNC plug Phoenix Contact MSTB2.5/2-STF-5.08
Single item
AL-00329459-01 CND plug Phoenix Contact IC2.5/4-STF-5.08
10150-3000VE
10350-52A0-008
10120-3000VE
Low-voltage
circuit connector
set
AL-00292309
CN1 or CN2 plug and
housing
Sumitomo 3M
10320-52A0-008
MSTB2.5/5-STF-5.08
IC2.5/3-STF-5.08
High-voltage
circuit connector
set
AL-00377169 CNA, CNB or CND plug Phoenix Contact
IC2.5/4-STF-5.08
10150-3000VE
10350-52A0-008
10120-3000VE
10320-52A0-008
MSTB2.5/5-STF-5.08
IC2.5/3-STF-5.08
PY2A015 and
PY2A030 (without
RDY output) set
AL-00382550
CN1 or CN2 plug and
housing
CNA, CNB or CND plug
Sumitomo 3M
Phoenix Contact
IC2.5/4-STF-5.08
PY2A015 and
PY2A030
(with RDY
output) set
AL-00382550
AL-00329460-01
CN1 or CN2 plug and
housing
CNA, CNB, CNC or
CND plug
Sumitomo 3M
Phoenix Contact
PY2A015 (built-in 10150-3000VE
Regenerative resistor) 10350-52A0-008
PY2A030 (built-in 10120-3000VE
Regenerative resistor) 10320-52A0-008
PY2A050(without MSTB2.5/5-STF-5.08
RDY output) set
AL-00393603
Sumitomo 3M
Phoenix Contact
IC2.5/3-STF-5.08
PY2A015 (built-in
Regenerative resistor)
PY2A030 (built-in
Regenerative resistor)
PY2A050 (with
RDY output) set
AL-00393605
CN1 or CN2 plug and
housing
CNA, CNB or CNC plug
Sumitomo 3M
Phoenix Contact