9. SPECIFICATIONS
9－58
9.2 Servomotor
9.2.1 Common Specifications
Table 9-17 Common Specifications of P3, P5, P6 and P8 Series Servomotors
Series P1 P2 P3 P5 P6 P8
Time rating Continuous
Insulation class Class F
Dielectric strength 1500 VAC for 1 minute
Insulation resistance 500 VDC and 10 MΩ minimum
Protective system Totally-enclosed and self-cooling type
IP67 IP40
P50B03,04:IP40
Other than the
above: IP55
IP67
Sealing Provided Not
provided
P50B03,04: Not
provided
Other than the
above:
Provided
Provided
Ambient temperature 0 to +40°C
Storage temperature − 20 to 65°C
Ambient humidity 20% to 90% (no condensation)
Vibration class V10 V15
Coating color Munsell N1.5 equivalent (outside)
Excitation system Permanent magnet type
Installation method Flange type
Conforms to IP67 using a waterproof connector, conduit, shell, clamp, etc. for the other side.
To Next Page
Loading...
