3. SERVO SYSTEM CONFIGURATION
3－8
● Personal computer interface
The following parts are available for communication with PC.
Model No. Remarks
AL-00356620-01 Specialized cable
SFY95-00 Communication program
● External regenerative resistor
Use one when load with large inertia is to be operated or in other necessary cases.
Model No. Model No.
REGIST-080W 100B REGIST-220W 20B
REGIST-080W 50B REGIST-500W 20B
REGIST-120W 100B REGIST-500W 14B
REGIST-120W 50B REGIST-500W 10B
REGIST-220W 100B REGIST-500W 7B
REGIST-220W 50B
● Cable
Only sensor cables are available. Terminals, however, are not treated.
Model No. Remarks
6879019-1 For wiring-saved incremental encoder (20 m or shorter)
6870010-1 For wiring-saved incremental encoder (20 m or longer)
For absolute encoder (ABS-E)
Absolute sensor (ABS-R II)
● Cannon connector
Use a connector to wire the Servo Amplifier and the motor.
Model No. Remarks
MS06B24-11S-16 Straight plug for the P1, P2, P6 or P8 motor power line.
MS06B20-29S-12 Straight plug for the P1, P2, P6 or P8 motor sensor line.
● Anti-noise parts
The following anti-noise parts are available.
Model No. Remarks
CRE-50500 Spark killer
R·A·V-781BXZ-2A Surge protector
The PC interface can be used only on Windows 95.
A type without a thermal (no "B" at the end of the model number) is also available.
To Next Page
Loading...
