i
CE Marking
At Sanyo Denki, we are executing tests on the “PY2” Servo Amplifier for compliance with the CE marking at
qualifying institutions. The CE mark is required to be attached all end products sold in EU countries.
Only products conforming to the safety standards are permitted to have them. Accordingly, customers are
requested to perform the final conformity test on their machines or systems incorporating our amplifiers.
The CE Marking Conformity Standards
We execute conformity tests for the following standards on the “PY2” Servo Amplifier at qualifying
institutions.
Classification of
directive
Classification Test Test standard
Low Voltage
Directive
－ － EN50178
Terminal interference voltage EN55011
Emission
Electromagnetic radiation
interference
EN55011
Radiation field immunity
EN61000-4-3 / 1996
ENV50204 / 1995
Conductivity immunity EN61000-4-6 / 1996
Electrostatic immunity
EN61000-4-2
EN61000-4-2 : A1 / 1998
Electrostatic immunity
EN61000-4-2
EN61000-4-2 : A1 / 1998
EMC Directive
Immunity
Burst immunity EN61000-4-4 / 1995
File numbers
Low Voltage Directive, Declaration : File No. C0002827C
Low Voltage Directive, Certification : File No. B 01 05 21206 040 (Messrs. TÜV PRODUCT SERVICE)
EMC Directive, Declaration : File No. C0004056
EMC Directive, Certification : File No. E9 99 05 30982 005 (Messrs. TÜV PRODUCT SERVICE)
UL Marking
The “PY2” series products are qualified to have the UL (U.S. version) and cUL (Canada version) marks of
the Underwriters Laboratories attached.
File Numbers
File No.: E179775 Power Conversion Equipment (CCN: NMMS, NMMS7)
Fuse
The “PY2” Servo Amplifiers are not equipped with fuses. Customers are requested to prepare a
UL-approved fast-blown fuse and install it in the input section of the main circuit power supply.
To Next Page
Loading...
