12 Cubis
®
MCE Operating Instructions
Device Description
3.4 Connections on the Control Unit
Fig. 4: Connections on the control unit
Pos. Designation Description
1 USB connection Concealed, no function, for Sartorius Service only
3.5 Conformity-assessed Devices
Some settings of conformity-assessed models are protected against user changes,
e.g. external calibration for devices in accuracy class II. This measure is intended to
ensure the suitability of the devices for use in legal metrology.
3.6 Symbols on the Device
Fig. 5: ID label on the device
Pos. Designation Description
1 Manufacturer’s ID label Displays the metrological data of the device.
Symbol Meaning
During operation, parts in the device may be live. Only electricians
may have access to and work on these parts, such as for
maintenance and repairs.
1
1
To Next Page
Loading...
Need help?
General